USB Stick Holder (Pen Drive)

USB Stick Holder (Pen Drive)
By BIFANG13

Very simple design and prints quickly due to the size.

Can fit up to 16 common size USB sticks.

October 31, 2021 at 10:01PM
via Thingiverse – Newest Things https://ift.tt/2ZxUFZf

dyson tight corners attachment

dyson tight corners attachment
By catdad_workshop

This is a small adapter that I made in order to clean inside drawers, on top of baseboards, and other tight areas that tend to collect dust and debris. It has come in handy a number of times. I wonder why the vacuum doesn’t come with an attachment like this

October 31, 2021 at 09:56PM
via Thingiverse – Newest Things https://ift.tt/3bqvKcX

CUBE PYRAMID PUZZEL

CUBE PYRAMID PUZZEL
By amazingmj

ITS PUZZEL

October 31, 2021 at 09:50PM
via Thingiverse – Newest Things https://ift.tt/3By2cVk

shyGuy mask

shyGuy mask
By dextraise

a shyguy mask, should fit almost every head 🙂

October 31, 2021 at 09:49PM
via Thingiverse – Newest Things https://ift.tt/3bpizca

Pixel 6 Pro

Pixel 6 Pro
By JoshCraft3D

Made a scale Pixel 6 Pro to design my Case around.

October 31, 2021 at 09:48PM
via Thingiverse – Newest Things https://ift.tt/3jTDMPQ

Classic Corn Sheller

Classic Corn Sheller
By airrelic

This is my take on the classic corn sheller. Print with the wide, thin edge against the build plate using a thin brim as support. I suggest a more rugged material such as PLA+ or ABS. As always make sure your machine is dialed in and your layer adhesion is good.

I suggest at least a 1mm wall thickness with 20 to 25% infill.

October 31, 2021 at 09:48PM
via Thingiverse – Newest Things https://ift.tt/3nL72tl

Customizable Razor Stand

Customizable Razor Stand
By justheath

My son likes shaving and collecting old razors. Upon completion of USMC boot camp he wanted something to hold a couple in next to the sink. He found this model https://www.thingiverse.com/thing:82968 and asked me to print.

We measured his brush handles and determined that the model needed adjusting to fit. Fortunately an OpenSCAD file was provided so we could make some changes. But it wasn’t as easy as we hoped…

I made a few changes to accommodate a few of his razors and brushes and started printing. While waiting I decided it’d be fun to parameterize the whole model and learn some more OpenSCAD. This design is the result.

This design lets you change the brush holder sizes easily, adjusting all openings accordingly and sizing the stand’s depth accordingly. You can also change the angles of the criss-cross panels and their lengths, and the razor holes size and placement are configurable, as is the overall width. This version also bevels the brush holder openings.

The attached images are my print of the modified version of the original, not from my fully parameterized version. They should still give you a feel for how it will appear as I retained the spirit of the original, minus the holes below the brush.

October 31, 2021 at 09:46PM
via Thingiverse – Newest Things https://ift.tt/31iLH30

Freddie Mercury’s autograph

Freddie Mercury’s autograph
By Tinkersmith

Our Lord and Saviour Freddie Mercury’s autograph. I wanted it big and proud on my wall, and figured I’d just as well share it with the community!

October 31, 2021 at 09:45PM
via Thingiverse – Newest Things https://ift.tt/3nO9FKO

4″ Round Duct Take Off

4″ Round Duct Take Off
By coltography

4″ round duct take off

October 31, 2021 at 09:42PM
via Thingiverse – Newest Things https://ift.tt/3BwLaH4

Quicktool change Direct Linear Rails Probe mount

Quicktool change Direct Linear Rails Probe mount
By Daniel_007

I’ve remixed these two files together. I use a Linear Rails and really love the idea of the Quick Release so i’ve made this version for Linear Rails.
I’ve printed it in ABS becouse I use an enclosure and PETG doesn’t like Bed temps over 100 degrees.

October 31, 2021 at 09:40PM
via Thingiverse – Newest Things https://ift.tt/3w5N68u