Dust Port for Delta 12″ Disc Sander

Dust Port for Delta 12″ Disc Sander
By jeffthompson

I got an older Delta 12″ disc sander which is a wonderful machine, but it has a really unusual dust collection hookup. You can find the adapters on eBay (either for $$$ in cast iron or $$ for a 3D printed one) so I figured I’d make my own. This fits a standard 4″ dust collector hose, which can be run out the back however you want.

This is meant to be simple, quick to print, and no frills though you could definitely add more!

You’ll also need either:

  • 2x 5/16″-18 bolts (need to be pretty short, 1/2″ seems ok), or…
  • 2x 5/16″-18 threaded studs (I cut mine to about 3/4″ long from one really long bolt) and two washers/nuts to match

The threaded stud/nut option is definitely easier to install in the cramped quarters under the sander.

December 8, 2021 at 07:28PM
via Thingiverse – Newest Things https://ift.tt/3ozO0aW


Inserisci i tuoi dati qui sotto o clicca su un'icona per effettuare l'accesso:

Logo di WordPress.com

Stai commentando usando il tuo account WordPress.com. Chiudi sessione /  Modifica )

Foto Twitter

Stai commentando usando il tuo account Twitter. Chiudi sessione /  Modifica )

Foto di Facebook

Stai commentando usando il tuo account Facebook. Chiudi sessione /  Modifica )

Connessione a %s...

%d blogger hanno fatto clic su Mi Piace per questo: