TPU pads for Ukulele Capo
By Jcoon
the capo needed pads so I designed two pads that will clip on, one for the strings and one for the neck. Print in TPU 95A. takes between 30 minutes for the neck pad and an hour for the string pad.
Print the string pad vertical, no supports needed.
Print the neck pad horizontal with supports
May 17, 2024 at 04:38AM
via Thingiverse – Newest Things https://ift.tt/1x0SI2Z
ARK Survival Evolved: The Island
By Infinite_M0nkeys
A model of the map of the Island from the game ARK: Survival Evolved. Painted, and added an epoxy pour. Exported the heightmap and terrain files using the Ark Unreal Engine Dev Kit, then reduced and combined the models.
May 17, 2024 at 04:37AM
via Thingiverse – Newest Things https://ift.tt/HN4lepK
Anadi gingerbread witch
By ShinjiteFlorana
You read that right. Gingerbread witch. Giant spider person (Anadi). I’m naming her Nabizco (pun off Nabisco), she’s a new character so not much to tell from there.
I digitally kitbashed this in Meshmixer from soooooooo many things, way to many things to list while also doing some sculpting of my own. You can find her human form uploaded from me as well. Plan to print her in resin with a 2/10 flex resin to ABS like solution, will update with photos when its done.
If you’d like this model but without the witch hat so your party can have a friendly giant spider cook, let me know.
May 17, 2024 at 04:31AM
via Thingiverse – Newest Things https://ift.tt/bV4SEAg
SeedSigner
By luizinpp
SeedSigner
Credits: https://github.com/SeedSigner/seedsigner/tree/dev/enclosures
May 17, 2024 at 04:17AM
via Thingiverse – Newest Things https://ift.tt/3xonyEP
Holder for Filament spool holder
By TechieZebra
Platform holder for filament spool holders. Purchased mine from Temu, but I have seen the exact same ones on Amazon.
Spacing for filament holder is for 1Kg spools.
May 17, 2024 at 04:17AM
via Thingiverse – Newest Things https://ift.tt/1ovG2TZ
Philips Hue Bollard – Replacement Body (no diffuser nor electronics)
By MikeMadeAThing
One of our Philips Hue Bollard outdoor lights was run over by a truck. The light and diffuser were fine, but the metal body was destroyed (see photo).
Modeled a replacement body and bottom cover cap. Fits perfectly and has holes for all mountings from the original. There are at least two generations of this device so I’m not sure if this would fit the newer generation or not, but definitely fits the older (circa 2019) models.
Printed in PETG, sprayed with flat black paint to protect from sun and match the appearance of the others we have. If you need the original file from Fusion or if you need a modification just let me know.
May 17, 2024 at 03:56AM
via Thingiverse – Newest Things https://ift.tt/o5OgNHQ
cobra buzz boar
By Brycehan
smoothed front and back buzzboar sections
the zip folders are the smoothed versions
May 17, 2024 at 03:56AM
via Thingiverse – Newest Things https://ift.tt/v0hOdWb
Signal/Wiper Stalk Bracket for TR-One Front Mount
By reeseboisse
For mounting Sim Rig Direct (modified Dongfeng, available on Ebay) indicator/wiper stalks to a Trak Racer TR-One front mount. Clearances between everything are entirely dependent on your setup, so unless you are using the same everything, this may need significant modification to work for you. Pictured with a Simagic Alpha U wheelbase and a Simagic GTSC on a Simagic QR, and 330mm and 350mm Nardi Deep Corns on NRG QRs, for reference of distance between stalks and wheel.
STEP and F3D files are included for modification for other types of front mounts. If using Fusion, this may at least be helpful as a guide and some sketches to create something different for other front mount bolt patterns.
Note that the stalks will need relocation of their USB control boards to the bottom of the unit, or someplace other than the back. Do this carefully, and add hot glue to the connector pinout and wires, as they’re fragile and may touch the DD front mount.
May 17, 2024 at 03:55AM
via Thingiverse – Newest Things https://ift.tt/QSbypoZ
Empire’s End boardgame organizer
By iksnel
I did not like the given organizer that came with the game, it was just a bit clunky, so i made this. Included is a deck shoe because i feel that the deck is a bit hard to handle.
May 17, 2024 at 03:54AM
via Thingiverse – Newest Things https://ift.tt/OyhMvP0
Break sign
By CommanderFun93
Customized version of https://www.thingiverse.com/thing:3361994
Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing_id=3361994
May 17, 2024 at 03:50AM
via Thingiverse – Newest Things https://ift.tt/37e0n42
thingiverse novita’
3d print ......errori ed esperienze, 